Open MPI

Open MPI is an Message Passing Interface (MPI) library project combining technologies and resources from several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI).

Developer: Open MPI Development Team Platforms: NEC Nehalem Cluster Category: MPI License: New BSD license Website: Open MPI homepage

Examples

Simple example

This example shows the basic steps when using Open MPI.

Load the necessary module

module load mpi/openmpi

Compile your application using the MPI wrapper compilers mpicc, mpic++ or mpif90:

mpicc your_app.c - o your_app

The wrapper compiler will pass any other option to the underlying base compiler (e.g. GNU, Intel, PGI). To figure out Open MPI's default options passed to the base compiler is by using

mpicc -showme

and it's variants -showme:compile, -showme:link and the like.

Now you can allocate compute nodes via the Batch_system and run your application with

mpirun <MPI OPTIONS> your_app

Specifying the number of processes per node

Open MPI divides resources in something called 'slots'. Per default, the number of slots per node is specified by the Batch_system. Details can be specified on mpirun command line.

If you want to use less processes per node e.g. because you are restricted by memory requirements, or you have a hybrid parallel application using MPI and OpenMP,

Open MPI will always try to fill sockets and nodes with processes before moving to the next socket or node.

To avoid this, you can use the -npernode option.

mpirun -np X -npernode 2 your_app

This would start 2 processes per node. Like this, you can use a larger number of nodes with a smaller number of processes, or you can e.g. start threads out of the processes.

Process pinning

Open MPI allows the pinning of processes via the '--bind-to-*' options.

Binding processes to CPU cores is done with

mpirun -np X --bind-to-core your_app

Warning: Do not use the --mca mpi_paffinity_alone 1 with newer versions of Open MPI as it may not do what you expect.

Binding processes to a socket is done with

mpirun -np X --bind-to-socket your_app

The actuall binding policy of Open MPI can be displayed with

mpirun -np X --report-bindings --bind-to-socket /bin/true

Thread pinning

For pinning of hybrid MPI/OpenMP, use the following wrapper script

File: thread_pin_wrapper.sh

#!/bin/bash
export KMP_AFFINITY=verbose,scatter    # Intel specific environment variable
export OMP_NUM_THREADS=4

RANK=${OMPI_COMM_WORLD_RANK:=$PMI_RANK}
if [ $(expr $RANK % 2) = 0  ]
then
     export GOMP_CPU_AFFINITY=0-3
     numactl --preferred=0 --cpunodebind=0 $@
else
     export GOMP_CPU_AFFINITY=4-7
     numactl --preferred=1 --cpunodebind=1 $@
fi

Run your application with the following command

mpirun -np X -npernode 2 thread_pin_wrapper.sh your_app

Warning: Do not use the mpi_paffinity_alone option in this case!

Valgrind Debugging

You may easily debug Your application with the memory-error detector valgrind. This will detect errors such as usage of uninitialized memory, buffer over-runs, double-free's, lost memory (leaks). To run with Open MPI, just pass it just before specifying the application:

module load tools/valgrind mpirun -np X valgrind your_app

This will show up many false positives from Open MPI itselve -- e.g. memory communicated via TCP/IP with known uninitialized memory, buffer copied from the kernel to the InfiniBand Verbs library. Valgrind offers suppressing these false positives. Open MPI provides a suppression-file installed in the default location:

mpirun -np X valgrind --suppressions=`dirname $(dirname $( which mpirun ))`/share/openmpi/openmpi-valgrind.supp your_app

Common Problems

InfiniBand retry count

I get an error message about timeouts, what can I do?

If your parallel programs sometimes crash with an error message like this:

--------------------------------------------------------------------------
The InfiniBand retry count between two MPI processes has been
exceeded.  "Retry count" is defined in the InfiniBand spec 1.2
(section 12.7.38):

    The total number of times that the sender wishes the receiver to
    retry timeout, packet sequence, etc. errors before posting a
    completion error.

This error typically means that there is something awry within the
InfiniBand fabric itself.  You should note the hosts on which this
error has occurred; it has been observed that rebooting or removing a
particular host from the job can sometimes resolve this issue.  

Two MCA parameters can be used to control Open MPI's behavior with
respect to the retry count:

* btl_openib_ib_retry_count - The number of times the sender will
  attempt to retry (defaulted to 7, the maximum value).

* btl_openib_ib_timeout - The local ACK timeout parameter (defaulted
  to 10).  The actual timeout value used is calculated as:

     4.096 microseconds * (2^btl_openib_ib_timeout)

  See the InfiniBand spec 1.2 (section 12.7.34) for more details.
--------------------------------------------------------------------------

This means that the mpi messages can't pass through our infiniband switches before the btl_openib_ib_timeout is over. How often this occurs depends also on the traffic on the network. We have adjusted the parameters such that it should normally work, but if you have compiled your own OpenMPI, maybe also as part of another program package, you might not have adjusted this value correctly. However, you can specify it when calling mpirun:

mpirun -mca btl_openib_ib_timeout 20 -np ... your-program ...

you can check the preconfigured parameters of the module currently loaded by:

 ompi_info --param btl openib 

where you can grep for the above mentioned parameters.

See also

• Software Development Tools, Compilers & Libraries

External links

• Open MPI homepage
• Valgrind homepage