- Infos im HLRS Wiki sind nicht rechtsverbindlich und ohne Gewähr -
- Information contained in the HLRS Wiki is not legally binding and HLRS is not responsible for any damages that might result from its use -

CRAY XC40 Graphic Environment: Difference between revisions

From HLRS Platforms
Jump to navigationJump to search
No edit summary
Line 221: Line 221:


CMAKE_SHARED_LINKER_FLAGS      : -z muldefs
CMAKE_SHARED_LINKER_FLAGS      : -z muldefs
CMAKE_CXX_FLAGS                : -dynamic
CMAKE_C_FLAGS                  : -dynamic
</pre>
</pre>



Revision as of 08:59, 7 October 2014

To use the graphic hardware for remote rendering there are currently two ways tested. The first is via TurboVNC the second one is directly via VirtualGL.

Visualisation Software

To use the installed visualisation software please follow the steps described below.

Covise

ParaView

Building Paraview

To build ParaView on hww machines first of all download the source package of the version to be build from http://www.paraview.org/download and extract it to your home directory.

The second step would be to create an empty build directory outside the source directory since an out of source build is the recomended way to compile ParaView.

To build ParaView certain recent dependencies have to be satisfied. For an OpenGL build these are:

  • Autotools
  • Cmake
  • Qt 4

If you plan to build a ParaView server suitable for the Hornet compute nodes also recent versions of

  • LLVM with CLang
  • libclc and
  • Mesa

have to be available.

All of these dependencies are installed on Hornet. Currently the following versions are available:

  • m4-1.4.17
  • autoconf-2.69
  • automake-1.14
  • libtool-2.4.2
  • pkg-config-0.28
  • llvm-3.4.2
  • libclc-0.1.5
  • Mesa-10.2.2
  • Qt-4.8.6
  • Cmake-3.0.2

Environment setup

To modify your environment in a way that the dependencies of the OpenGL-Client are usable, source the following bash-script.

setenv-gl.sh

#!/bin/bash
#
# Setup modules #######################################
module load tools/autotools
module load tools/cmake
module unload PrgEnv-cray 
module load PrgEnv-gnu
module swap gcc/4.9.1 gcc/4.8.1
#
# QT #################################################
export LD_LIBRARY_PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/qt/lib:$LD_LIBRARY_PATH
export PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/qt/bin:$PATH
#

To modify your environment in a way that the dependencies of the Mesa-Server are usable, source the following bash-script.

setenv-mesa.sh

#!/bin/bash
#
# Setup modules #######################################
module load tools/autotools
module load tools/cmake
module unload PrgEnv-cray 
module load PrgEnv-gnu
module swap gcc/4.9.1 gcc/4.8.1
#
# LLVM ###############################################
export LD_LIBRARY_PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/llvm/lib:$LD_LIBRARY_PATH
export PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/llvm/bin:$PATH
#
# MESA ###############################################
export LD_LIBRARY_PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/mesa/lib:$LD_LIBRARY_PATH
#
# QT #################################################
export LD_LIBRARY_PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/qt/lib:$LD_LIBRARY_PATH
export PATH=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/qt/bin:$PATH
#

This means, copying one of the statement-sets above to a file e.g. named setenv-pv.sh and executing

source setenv-pv.sh

will make your environment ready to build ParaView.

Source code patches

If you want to use your installation to build custom plugins, you have to patch one of VTK's source to enable the dynamic load of shared libraries during runtime. The file to patch is located in the VTK part of the ParaView source tree.

ParaView-vx.x.x/VTK/Utilities/KWSys/vtksys/DynamicLoader.cxx

The patch is basically disabling the #ifdef section for systems without shared library support. In Paraview version 4.1.0 this can be done by commenting out lines 380 - 422 as stated below.

374   return retval;
375 }
376 
377 } // namespace KWSYS_NAMESPACE
378 #endif
379 
380 // // ---------------------------------------------------------------
381 // // 5. Implementation for systems without dynamic libs
382 // // __gnu_blrts__ is IBM BlueGene/L
383 // // __LIBCATAMOUNT__ is defined on Catamount on Cray compute nodes
384 // #if defined(__gnu_blrts__) || defined(__LIBCATAMOUNT__) || defined(__CRAYXT_COMPUTE_LINUX_TARGET)
385 // #include <string.h> // for strerror()
386 // #define DYNAMICLOADER_DEFINED 1
387 
388 // namespace KWSYS_NAMESPACE
389 // {
390 
391 // //----------------------------------------------------------------------------
392 // DynamicLoader::LibraryHandle DynamicLoader::OpenLibrary(const char* libname )
393 // {
394 //   return 0;
395 // }
396 
397 // //----------------------------------------------------------------------------
398 // int DynamicLoader::CloseLibrary(DynamicLoader::LibraryHandle lib)
399 // {
400 //   if (!lib)
401 //     {
402 //     return 0;
403 //     }
404 
405 //   return 1;
406 // }
407 
408 // //----------------------------------------------------------------------------
409 // DynamicLoader::SymbolPointer DynamicLoader::GetSymbolAddress(
410 //     DynamicLoader::LibraryHandle lib, const char* sym)
411 // {
412 //   return 0;
413 // }
414 
415 // //----------------------------------------------------------------------------
416 // const char* DynamicLoader::LastError()
417 //   {
418 //   return "General error";
419 //   }
420 
421 // } // namespace KWSYS_NAMESPACE
422 // #endif
423 
424 #ifdef __MINT__
425 #define DYNAMICLOADER_DEFINED 1
426 #define _GNU_SOURCE /* for program_invocation_name */

Configuration

To configure and afterwards build ParaView enter your empty build directory and execute ccmake

cd <your_build_directory>
ccmake -Wno-dev <paraview_source_directory>

Press c for intial configuration. After cmake has done the initial configuration change the build parameters according to your needs. For the installation

BUILD_DOCUMENTATION            : OFF
BUILD_EXAMPLES                 : OFF
BUILD_SHARED_LIBS              : ON
BUILD_TESTING                  : OFF
CMAKE_BUILD_TYPE               : Release
PARAVIEW_ENABLE_PYTHON         : ON
PARAVIEW_INSTALL_DEVELOPMENT_F : ON
PARAVIEW_USE_MPI               : ON

Depending whether the OpenGL-Client or the Mesa-Server should be build the prefix is:

CMAKE_INSTALL_PREFIX           : /opt/hlrs/tools/paraview/4.1.0/OpenGL

or

CMAKE_INSTALL_PREFIX           : /opt/hlrs/tools/paraview/4.1.0/Mesa

Press c for configuration. After the configuration has finished you should encounter the following error:

 CMake Error at VTK/CMake/vtkTestingMPISupport.cmake:31 (message):
   MPIEXEC was empty.
 Call Stack (most recent call first):
   VTK/Parallel/MPI/CMakeLists.txt:4 (include)

Press e to exit the error display, press t to toogle advanced options and change the following build parameters.

MPIEXEC                        : aprun
MPIEXEC_MAX_NUMPROCS           : 24
MPI_Fortran_COMPILER           : /opt/cray/craype/2.2.0/bin/ftn

Module_vtkFiltersParallelGeome : ON
Module_vtkFiltersSelection     : ON
Module_vtkIOMPIParallel        : ON
Module_vtkImagingMath          : ON
Module_vtkImagingStatistics    : ON
Module_vtkImagingStencil       : ON
VTK_Group_Imaging              : ON
VTK_Group_MPI                  : ON

CMAKE_SHARED_LINKER_FLAGS      : -z muldefs

After changing these parameters you have to press c two times. After two configuration runs you will get a new option [g] to generate.

Press g to generate the makefiles an exit cmake.

If you want to build the Mesa-Server another non interactive configuration has to be done by executing the following command.

To build the OpenGL-Client you have to skip this step.

cmake \
    <paraview_source_directory> \
   -DPARAVIEW_BUILD_QT_GUI=OFF \
   -DVTK_USE_X=OFF \
   -DOPENGL_INCLUDE_DIR=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/mesa/include \
   -DOPENGL_gl_LIBRARY=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/mesa/lib/libOSMesa.so \
   -DOPENGL_glu_LIBRARY=/usr/lib/libGLU.so \
   -DVTK_OPENGL_HAS_OSMESA=ON \
   -DOSMESA_INCLUDE_DIR=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/mesa/include \
   -DOSMESA_LIBRARY=/sw/hornet/hlrs/tools/paraview/4.1.0/aux/mesa/lib/libOSMesa.so

Build

To build, login to a mom node e.g.

ssh mom12

Then compile and install with

make
make install