- Infos im HLRS Wiki sind nicht rechtsverbindlich und ohne Gewähr -
- Information contained in the HLRS Wiki is not legally binding and HLRS is not responsible for any damages that might result from its use -
CrayProfiler
Cray Profiler : Function-level instrumentation for MPI, SHMEM, heap, and I/O
To use this library, load the "tools/cray_profiler" module and relink your application
When an application is run with the profiler library, profiler becomes active when MPI_Init() is called, MPI calls are timed during the run and a "profile.txt" file is written when MPI_Finalize() is called.
THE SOFTWARE IS PROVIDED "AS IS", WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. THIS SOFTWARE MAY NOT BE REDISTRIBUTED OR SUBLICENSED WITHOUT WRITTEN PERMISSION FROM CRAY INC.
Usage
|
module load tools/cray_profiler relink your executable
|
Description
Profiler is a library which intercepts calls to other libraries, and collects statistics to be printed at the end of the run to the profile.txt report file.
A summary showing minimum, maximum, and average values for the processes in the run is included, followed by per-process details. The summary is printed when MPI_Finalize or shmem_finalize is called, and includes activity up to that point. The per-process details are printed when the program terminates, and includes activity for the full run. The summary report is omitted for single process jobs. For MPMD jobs, the summary is repeated for each application in the job. Summaries on arbitrary ranges of processes can be printed by setting PROFILER_GROUPS. The report format has comma-separated fields for easy parsing or importing into spreadsheet tools such as Excel.
The intercepts which are implemented are: MPI (including MPI-IO), SHMEM (including symmetric heap usage), standard I/O, POSIX I/O, heap allocation, Global Arrays and ARMCI. In addition, system statistics such as user CPU time are collected and hardware performance counters are optionally collected. Profiler is compatible with IOBUF
Additional features are available and are detailed below.
- PAPI performance counter collection and reporting.
- Strace-like call tracing can be produced for all intercepted calls.
- Messages and I/O requests can be reported by size via the binning feature.
- Instruction pointer sampling
- Profile by caller provides a call traceback feature.
- Point-to-point partners generates a report of top message send destination process ranks.
- Record and playback allows the MPI calls of one or more processes of a job to be recorded and then individual processes of the same job can be rerun via playback.
- Run time data collection control API.
- Handling of error conditions and program aborts.
- Per-file I/O reporting.
- OpenMP thread reporting.
- Process group summary
Linking Profiler
Since the profiler implementation is based on adding a layer of intercept functions to gather many of its statistics, profiler must be linked between a reference to a routine and its definition. This is easily done in cases where an application contains calls to a library such as MPI by linking profiler after the application object files but before the MPI library.
On Cray XT/XE/XC systems, linking can often be done implicitly by loading the cray_profiler module before linking the application. To ensure proper linking order, load the cray_profiler module after all other library modules. If module load order can't be guaranteed, adding explicit library references to the link command can define the order. For example, using -lprofiler -lmpich will link profiler before MPICH.
For the case where a library makes calls to another library, adding an extra link option to include profiler between the two libraries is necessary. For example, to instrument the calls to ARMCI made from the Global Arrays library, use link options like -lga -lprofiler -larmci.
For some programs, it is necessary to include an extra -Wl,-uprofiler option when linking. This option forces profiler to be included. Some types of programs, in particular pure-Fortran serial programs, have no profiled function intercepts at the program level, but including -lprofiler after the appropriate libraries is difficult. This link option is included automatically when the cray_profiler module is loaded.
Dynamic Linking
The profiler module references the static profiler library by linking as -lprofiler. This is the preferred way to include profiler in dynamically linked executables. Profiler can also be included by the dynamic linker at run time by setting the LD_PRELOAD environment variable. LD_PRELOAD only works with dynamically linked executables.
Care must be taken when setting LD_PRELOAD, because it affects all dynamically linked executables. This includes system commands like cp and mv, and also includes aprun. The preferred way to run a compute-node program launched by aprun using the LD_PRELOAD feature to include profiler in a prelinked executable. To make the process more easy to use the cray_profiler module provides an enviroment variable named CRAY_PROFILER_PRELOAD which is used as in the following commands:
This method ensures that only the application program (a.out in the example above) will be profiled. If LD_PRELOAD is set before the aprun command, aprun and all dynamically linked executables started by aprun will be profiled. Profiler attempts to identify this situation and will avoid writing a profile if the command name is aprun or gzip. So while not recommended, the following syntax also works:
If profiler has been explicitly linked into an exectuable, do not use the LD_PRELOAD method to include profiler. This may result in two versions of profiler executing simultaneously, and unpredictable results. The most likely outcome is that profiles are written by both the static and dynamic versions of profiler, resulting in garbled, truncated, or incorrect output.
Environment Variables
The following environment variables can be set to change the behavior of profiler.
|
| |||
|---|---|---|---|
| Variable | Values | Default | Description |
| PROFILER_BIN | 0, 1, or module list | 0 (disabled) | If enabled, prints a breakdown of messages or I/O based on size. Nine bins are defined, starting with zero and 1-16 bytes, then increasing as multiples of 16 to a maximum bin size of 4 GB. Also, specifying samp will report IP sampling by source file line number. |
| PROFILER_CALLER | 0, 1, or module list | 0 (not enabled) | If enabled, captures an extra level of detail by reporting timings based on the routine caller via a call stack traceback. PROFILER_COLLECT must be enabled for the module. |
| PROFILER_COLLECT | 0, 1, or module list | 1 (enabled) | Control timing and summary reporting of profiled routines. If timing is turned off, the profiled routines are still intercepted, but no data collection is performed. When the profile report is printed, any modules which had timing collection disabled are skipped. The samp module is off by default, so it must be explicitly enabled by setting PROFILER_COLLECT to samp or all,samp. |
| PROFILER_COLLECTIVE_SYNC | 0, 1, or module list | 1 (enabled) | If enabled, all collectives are preceeded with a barrier to measure collective synchronization time. Can be used with mpi and shmem. |
| PROFILER_DEBUG | 0, 1, or module list | 0 (disabled) | Print profiler debugging information. |
| PROFILER_DETAIL | 0, 1, or module list | 1 (enabled) | Print per-process profiling report. The default is 1 (enabled) if the parallel run size is less than 100 processes, otherwise the default is 0 (disabled). The summary report will still be printed for a parallel run even when the detail report is disabled. This setting is ignored for serial runs; the detail report is always printed. |
| PROFILER_DISABLE | 0 or 1 | 0 | If set to 1, then profiling is disabled and no report is printed. This allows an executable linked with profiler to be run with no profiling. |
| PROFILER_GROUPS | ranks list | No groups |
Each range of ranks x-y given results in a separate summary report giving the min, max, and average values for the processes within the range. See [#PROFILER_GROUPS Process group summary] below. |
| PROFILER_LABEL | 0, 1 | 0 (disabled) | If enabled, adds MPI process rank labels to the beginning of every line printed to stdout (standard output). If only labels are desired, and no profiling, also set PROFILER_DISABLE=1. |
| PROFILER_OUTPUT | filename | profile.txt |
Profile report output file name. Special tokens are expanded at run time and can be used to create unique output files for multiple runs ([#PROFILER_OUTPUT see below]). |
| PROFILER_PAPI | counter list | A comma-separated list of PAPI event names (preset or native). This is ignored if the PAPI module is not active. The default and maximum list size depends upon the processor type, but usually includes the number of floating point operations. | |
| PROFILER_PARTNERS | integer | 0 | The number of top point-to-point message partners reported. If set to all, all destination processes are listed. |
| PROFILER_RANKS | ranks list | - (all ranks) | List of processes enabled for recording (see PROFILER_RECORD). The value is a semicolon-separated list of ranks or rank ranges. A rank is a single integer, and a range x-y includes the ranks from x to y. If x is omitted, then all ranks less than or equal to y are selected. If y is omitted, then all ranks equal to or greater than x are selected. For example, 0 selects rank 0 only, while 1- selects all ranks except 0. |
| PROFILER_PLAYBACK | filename | None (disabled) | This is the name of the input file for playback (record.n |
| PROFILER_RECORD | 0, 1, or module list | 0 (disabled) | If enabled, each process rank writes a file name record.rank for each supported routine. The file contains the results of the routine call (return value and modified argument variables) along with the time to execute the call. A subset of all processes can be selected by setting PROFILER_RANKS. |
| PROFILER_TRACE | 0, 1, or module list | 0 (disabled) | Print a trace of profiled routines when they are called, including arguments and return values. The traces are printed to stderr. |
| PROFILER_SHEPHERD | 0 or 1 | 1 (enabled) | By default, no profile is written for a PMI shepherd process. A PMI shepherd process is identified as a program which contains MPI callls but does not call any MPI functions. In some cases programs are mistaken as PMI shepherd processes, no profile is written. If set to 0, then the check for PMI shepherd process is skipped, so a profile is written. |
| PROFILER_TRAP | 0 or 1 | 1 (enabled) | By default, a set of signals are caught when a fault condition occurs, and a profile is written. The signals caught are: SIGHUP, SIGINT, SIGILL, SIGQUIT, SIGABRT, SIGIOT, SIGBUS, SIGFPE, SIGSEGV, SIGPIPE, and SIGTERM. If set to 1, then signals are caught, and a profile is written if a fault occurs. |
| PROFILER_UNWIND_LEVELS | integer | 0 | The number of call stack levels to be included in the profile by caller report. This can have the effect of expanding the number of results in the report, because each unique call path is reported separately. Requires caller profiling to be enabled (PROFILER_CALLER set). |
| PROFILER_WRAPPER_LEVELS | integer | 0 | The number of call stack levels to be discarded when unwinding the call stack. This is used when a wrapper library is in use by the application, but the call sites to the wrapper functions are of interest. Wrappers are sometimes used in programs which support multiple communications packages, such as MPI and shmem, where the package is a compile-time option for the wrappers. Requires caller profiling to be enabled (PROFILER_CALLER set). |
| PROFILER_WARN | 0, 1, or module list | 1 (enabled) | Print warning messages for profiler errors. |
| PROFILER_VERBOSE | 0, 1, or module list | 0 (disabled) | All available statistics are printed. The default is to suppress values which are zero. |
A setting of 1 selects that feature for all modules, and 0 deselects it. A synonym for 1 is all, while !all is the same as 0.
A module list provides more selectivity when selecting features. The value is a comma-separated list of one or more of the following keywords. If a ! preceeds the keyword, then feature is deselected for that module. The default if a module is not given in a list is to deselect the feature for that module even if the feature is enabled by default. As a shorthand, if the list begins with a deselected module, then unlisted modules are by selected by default. So mpi selects only the MPI module, while !mpi selects all modules except MPI.
Not all keywords are significant for all environment variables.
|
| |
|---|---|
| Keyword | Description |
| arcmi | ARMCI data transfer functions. Requires that the application also calls MPI or shmem. |
| all | Select all modules. Useful to change the default for unlisted modules from deselected to selected. Should always be specified as the first keyword. The samp module is not part of all, so it needs to be explicitly selected. |
| caller | Profile by caller module extension. |
| ga | Global Arrays data transfer functions. Requires that the application also calls MPI or shmem. |
| heap | Heap functions (malloc, free, etc.) |
| mpi | MPI functions (except MPI I/O). |
| mpio | MPI I/O functions. |
| papi | Hardware performance counters. |
| partners | MPI point-to-point message partners. Use with PROFILER_VERBOSE to get per-function reports. |
| pio | POSIX I/O calls (read, write, open, close, etc.). |
| prof | The profiler itself. Used with PROFILER_DISABLE, PROFILER_WARN and PROFILER_DEBUG. |
| samp | Instruction pointer sampling. |
| shmem | Shmem functions (except symmetric heap allocation). |
| stdio | Fortan I/O and standard I/O functions (fopen, fread, printf, etc.) |
| symheap | Symmetric heap functions (shmalloc, etc.). |
| sys | System statistics. This is a default module for all runs, and includes values like total run time, memory usage, and hardware configuration. Also includes floating point exception reporting. |
| syscall | System calls. |
Profiler summary groups
The default behavior for parallel runs is to print a summary report showing the minimum, maximum, and average value for each profiler result for all of the processes in the run. Setting PROFILER_GROUPS creates additional summary reports for the specified groups of processes. This feature requires MPI, and does not work with shmem-only programs.
PROFILER_GROUPS is set to comma-separated list of process rank ranges. A range can be a single integer, or a range x-y which includes the ranks from x to y. If x is omitted, then all ranks less than or equal to y are selected. If y is omitted, then all ranks equal to or greater than x are selected. For example, 0 selects rank 0 only, while 1- selects all ranks except 0.
Setting PROFILER_GROUPS=0-7,8-15 for a run with 16 processes will print three summary reports. The first report summarizes all 16 processes, the second report summarizes processes 0 through 7, and the third report summarizes processes 8 through 15.
An optional :stride suffix can be included on any process rank range. The default stride is 1.
Up to 10 process group ranges can be specified, and the PROFILER_GROUPS value can be at most 127 characters long.
Profiler output file name
The PROFILER_OUTPUT environment variable can be set to change the default profile output file name (profile.txt). The value can include a relative path from the current directory, or an absolute path (if the string begins with a "/" character). The value can contain special tokens which are expanded at run time to create unique output files for multiple runs.
|
| |
|---|---|
| Token | Substituted string |
| %h | host name (node name) |
| %j | batch job id (PBS or Moab/Torque) |
| %r | process rank (MPI_COMM_WORLD rank) |
| %p | process id (unique for every process on a node, but may be duplicated across nodes) |
| %s | number of processes (MPI_COMM_WORLD size) |
| %t | number of threads per process (OpenMP or pthreads) |
| %x | executable name |
Note that rank 0 writes the summary report, while every process writes detail reports (if enabled). This means that using %h, %p, or %r can result in multiple profile output files. For example, setting PROFILER_OUTPUT=profile_%r.txt and PROFILER_DETAIL=all will result in detail reports written to file profile_0.txt for rank 0, and so on.
Profiler with PBS
The default report output file name includes the PBS job id when profiler is running under PBS or Torque. The file name format is profiler.jobid.txt.
Using the record and playback feature
The record and playback feature is meant to address a performance estimation issue when a large benchmark job can be run on an existing computer system, but only a much smaller configuration of a new system is available. It is not possible to run the full large job on the small system, but playback of a small portion of the large job on the small system is possible. Other possible uses are to assist in single-process optimization or debugging of a large job. Rather than rerunning the large job repeatedly, a process can be recorded and replayed many times as incremental changes are made, so long as the MPI communication is not altered.
In earlier releases of profiler, the procedure was to link with -lprofiler for the record step, but to link with -lplayback for the playback step. This difference was required because the profiler library supports the record feature, but playback was only supported by the playback version of the library. This is no longer the case: both record and playback is supported with -lprofiler, and the use of -lplayback is deprecated.
An important note is that for both the record and the playback steps, the program must also be linked with the native MPI library. Although MPI is not used for communication during playback (since playback is always for a single process with MPI messages coming from the trace file), the library is still necessary to resolve some remaining issues with playback.
Setting the PROFILER_RECORD and PROFILER_RANKS variables allows a small portion of a larger job to be captured in trace files. The trace file data can then be replayed on another system by setting PROFILER_PLAYBACK for one or more processes. With these steps, it is possible to obtain performance information from a small portion of a large job during the replay step.
Currently only the mpi module implements the record and playback feature. When recording calls to MPI routines, the results of each call is saved to the trace file. Arguments to the call which are used as input data by the routine are not saved. Writing the trace file introduces overhead to the job, so it executes slower than a non-record job.
During playback, each process executes the identical calls as the process did in the large job. The trace file provides the output variable values for each of the calls. In this way, the replay process experiences an environment which exactly replicates the original process.
For example, consider a large MPI job running on a system. If MPI process rank 49 calls MPI_Comm_rank(MPI_COMM_WORLD,rank) while PROFILER_RECORD is active, the rank returned by the call is saved to the trace file record.49. When the same program is run as a single process with PROFILER_PLAYBACK=record.49, the call to MPI_Comm_rank(MPI_COMM_WORLD,rank) will read the trace file and set rank equal to 49. If the MPI process calls MPI_Recv with PROFILER_RECORD active, the result of the call (the message buffer contents) is saved to the trace file. On playback, the same call to MPI_Recv will read the trace file and fill the buffer with the correct message data.
Because of timing differences between the recorded calls and the playback calls, the performance of the program is impacted. In order to get a useful performance estimate for the overall job, the program run time needs to be divided into categories such as compute, communication, and I/O. The compute time is least impacted by the profiler instrumentation, so the compute time of the single process can be compared directly to the compute time of the corresponding MPI process of the full job. When PROFILER_RECORD=mpi is used, communication time for record and playback is not useful. Communication time without record or playback should be captured with a separate run. Depending upon the systems involved, it may make more sense to use the I/O time from either the record or the playback system.
Trace file size can be an issue when using this procedure. Long-running and communication-intensive program can generate trace files with many gigabytes of data. In most cases, a job with the full problem size and run time will not be possible.
There are possible issues with the playback environment that are outside the scope of profiler. All files read by the playback process must be available as in the original job, including temporary files written by another process (e.g., if an input file is partitioned by a master process into individual input files for each process). Also, environment variables needed by the process must be provided.
Run-time dynamic data collection control
Data collection can be controlled dynamically during program execution by calling profiler_enable(flag), where flag is 1 to enable data collection and 0 to disable it. When collection is disabled, statistics other than those reported by the System module are not collected. By the nature of the System module, some of the values reported (wall clock time, user CPU time, etc.) are for the whole program execution. However, if collection is disabled for some of the execution time, an additional statistic, Enabled wall time, is reported.
When collection is enabled, only those modules which were enabled via PROFILER_COLLECT (by default all modules) are enabled. If a subset of modules were selected via PROFILER_COLLECT, then only that subset is enabled and other modules remain disabled.
Regardless of the data collection status at the end of the run (enabled or disabled), statistics are still reported as long as PROFILER_DISABLE was not set. If PROFILER_DISABLE was set, no data collection and no reporting occurs.
Usage with IOBUF
Profiler can work with iobuf, but there are some quirks. iobuf combines all types of read and write calls, so individual call types like fprintf and fgets are not reported. The report sections from the profiler iobuf module are otherwise similar to the stdio module. Tracing of standard I/O calls is not possible when iobuf is in use.
Usage with PAPI
To select a non-default set of PAPI counter events, set PROFILER_PAPI to a comma-separated list of PAPI preset or native events. See [papi_opteron.html papi_opteron] for a list of Opteron native events.
The default set of hardware counters for Barcelona Opteron (quad core) and later are double precision floating point operations, single precision floating point operations, Packed SSE instructions, and SSE Merge MOV micro-ops (specified as RETIRED_SSE_OPERATIONS:DOUBLE_ADD_SUB_OPS:DOUBLE_MUL_OPS:DOUBLE_DIV_OPS:OP_TYPE, RETIRED_SSE_OPERATIONS:SINGLE_ADD_SUB_OPS:SINGLE_MUL_OPS:SINGLE_DIV_OPS:OP_TYPE, RETIRED_MMX_AND_FP_INSTRUCTIONS:PACKED_SSE_AND_SSE2, and RETIRED_MOVE_OPS:LOW_QW_MOVE_UOPS:HIGH_QW_MOVE_UOPS:ALL_OTHER_MERGING_MOVE_UOPS). The default set of hardware counters for Opteron prior to Barcelona (quad core) are Add pipe ops, Multiply pipe ops, Packed SSE instructions, and L1 data cache accesses (specified as PROFILER_PAPI=FP_ADD_PIPE,FP_MULT_PIPE,FR_FPU_SSE_SSE2_PACKED,DC_ACCESS). The maximum number of active counters is 4.
As an additional feature, when PAPI is available, an extra test is run on Catamount to determine the virtual memory page size (2 MB large pages or 4 KB small pages) by counting the number of TLB misses for a memory access loop. This heuristic provides the page size notation in the report.
MPI persistent request handling
Calls to create MPI persistent requests (MPI_Send_init, MPI_Recv_init, etc.) are reported, including the byte counts of the requests. Additionally, calls to the start, wait, and test routines include the total byte counts. For example, if a persistent request is created via MPI_Send_init with a message size of 100 bytes, then MPI_Start is called three times with this request, then 100 bytes will be reported for Send_init and 300 bytes will be reported for Start.
Reports for programs which exit early
If an MPI program exits before MPI_Finalize is called, if a fault such as segmentation violation occurs, or if an asynchronous signal such as SIGTERM from qdel is received, a profile is still written. In this case, no summary can be created because there is no way to coordinate the processes. All processes which encounter the condition will write individual detailed reports.
Point-to-point message report
When PROFILER_PARTNERS is set to an integer value, a report is generated showing the top destination process ranks for the point-to-point send calls made by each process. The point-to-point send calls are MPI_Send, MPI_Isend, MPI_Sendreceive, etc. MPI one-sided get/put, persistent requests, and shmem calls are not supported. If a process calls no point-to-point send functions, it is listed as "No messages sent" in the report.
The report lists each process rank and its top partners, giving the number of messages sent, the total number of bytes sent, and the time for the send operations. A simple example of the report using 2 processes and PROFILER_PARTNERS=1 is
Point-to-point message partners report.
Src, Dest, Count, Bytes, Time
0, 1, 120, 250480, 0.002
1, 0, 130, 250480, 0.030
Instruction pointer (IP) sampling
A profile breakdown by time spent in routines can be included in the report by setting PROFILER_COLLECT=samp (sampling only) or PROFILER_COLLECT=all,samp (regular profile report plus sampling). This feature is similar to the CrayPat default report for the sampling experiment. The progam's instruction pointer is sampled at 10 millisecond intervals. Each sample taken while a routine is executing contributes to its total.
For an extra level of detail, specifying PROFILER_BIN=samp will add reporting by source code line number. For line number reporting, the routine must be compiled with -g or with the craypat module loaded (which automatically adds the -g option).
Below is an example of the IP sampling summary report.
IP samples: 34846 total samples Min, Max, Avg, Min PE, Max PE, Function 17.0%, 17.2%, 17.1%, 2, 3, ngb_treefind_variable, ngb.c 17.0%, 17.0%, 17.0%, 3, 0, ngb_treefind_pairs, ngb.c 12.9%, 13.2%, 13.1%, 0, 2, force_treeevaluate_shortrange, forcetree.c 8.7%, 8.8%, 8.7%, 1, 3, pmforce_periodic, pm_periodic.c 6.6%, 6.8%, 6.7%, 1, 3, hydro_evaluate, hydra.c 5.6%, 5.9%, 5.7%, 3, 2, density_evaluate, density.c 2.5%, 2.7%, 2.6%, 1, 3, __exp, w_exp.c 1.3%, 1.4%, 1.4%, 2, 0, __erfc, s_erf.c 1.0%, 1.2%, 1.1%, 2, 1, ewald_force, forcetree.c
The percentages reported correspond to the relative number of samples for that routine, and roughly correspond to the program run time percentage. By default, only routines with 1% or greater are listed, and lines with 0.05% are printed. If PROFILER_VERBOSE=samp is given, all samples are printed.
Profile by caller
A profile breakdown by caller can be included in the report by setting the PROFILER_CALLER environment variable.
To get source file line numbers in the profile, use the -g compiler option. Since -g sets the optimization level to -O0, list all optimization flags after -g (e.g., -g -O3). One way to get the proper compile options is by loading the xt-craypat module.
The profile by caller report lists the calling routine for profiled functions in the mpi, mpio, shmem, and stdio modules.
Per-file I/O reporting
Files read or written by a process are tracked and statistics for each file is given in the detail report. The report lists the number of I/O calls, total amount of I/O, the I/O time, along with the average I/O rate. Also included is a breakdown of the I/O sizes (minimum, maximum, and average).
Below is an example of a per-file I/O report.
Process 0: File I/O details
2005 writes, 0.084 MB total, 0.013 sec, 6.550 MB/sec, stdout
2 reads, 0.000 MB total, 0.001 sec, 0.030 MB/sec, fd(6)
73 writes, 0.063 MB total, 0.001 sec, 51.931 MB/sec, ./cpu.txt
73 writes, 0.007 MB total, 0.006 sec, 1.062 MB/sec, ./info.txt
74 writes, 0.023 MB total, 0.014 sec, 1.680 MB/sec, ./timings.txt
73 writes, 0.013 MB total, 0.003 sec, 3.800 MB/sec, ./balance.txt
73 writes, 0.001 MB total, 0.005 sec, 0.265 MB/sec, ./sfr.txt
11 writes, 22.021 MB total, 0.029 sec, 769.798 MB/sec, ./snap_smallset_003
write size (KB), 0.000 min, 0.467 max, 0.042 avg, stdout
read size (KB), 0.000 min, 0.012 max, 0.012 avg, fd(6)
write size (KB), 0.854 min, 0.860 max, 0.860 avg, ./cpu.txt
write size (KB), 0.065 min, 0.094 max, 0.093 avg, ./info.txt
write size (KB), 0.293 min, 0.316 max, 0.308 avg, ./timings.txt
write size (KB), 0.171 min, 0.956 max, 0.182 avg, ./balance.txt
write size (KB), 0.013 min, 0.018 max, 0.018 avg, ./sfr.txt
write size (KB), 1049.096 min, 2097.152 max, 2001.874 avg, ./snap_smallset_003
fd(6) in the report indicates an unnamed file (most likely a pipe(2)]]) with that file descriptor number. One source of such unnamed pipes is the SMP device implemented within MPT3.
Up to 64 files are tracked simultaneously, and up to 256 files are included in the report. Files beyond these limits are included in the process I/O totals, but are not reported individually. This report is generated by the pio module. Disabling the module (PROFILER_COLLECT=!pio) will disable this report.
OpenMP and POSIX thread reporting
Extra statistics are reported for programs using POSIX threads, including OpenMP in compilers that are compatible and based on pthreads. The OpenMP implementations in PGI and CCE are compatible, but Pathscale OpenMP is not.
The system details report section includes CPU affinity settings for each thread created during the run.
The PAPI details report section includes the PAPI counter totals for all threads and the counters for each individual thread when more than one thread is active during the run. Note that the PAPI counters reported in the PAPI summary report section only include the master thread counters. This is because the counters for the other threads are not available until those threads terminate. Most OpenMP implementations keep a pool of threads waiting for parallel execution throughout the run, so the threads are not terminated until after the summary has been printed.
Notes on units
If the label KB is used, the value is in units of kilobytes and is scaled by 2**10 (1024). If the label MB is used, the value is in units of megabytes and is scaled by 2**20 (1048576). If the label GB is used, the value is in units of megabytes and is scaled by 2**30 (1073741824). Otherwise, the value may be printed with a trailing character to indicate the scale factor. K is 10**3. M is 10**6. G is 10**9. If the value is printed with no trailing scale character and no scale label, then the value is unscaled.
Example Summary Report
Profile of allpair Number of processes , 2 Profiling started , Tue Aug 1 16:16:21 2006 Profiling ended , Tue Aug 1 16:16:21 2006 System summary , min, max, avg Wall clock time , 0.379, 0.379, 0.379 User CPU time , 0.379, 0.379, 0.379 Processor clock (GHz) , 2.400, 2.400, 2.400 PAPI summary , min, max, avg Total processor cycles , 791855041, 791857657, 791856349 User processor cycles , 791855669, 791858555, 791857112 FP add pipe ops , 383795, 1275119, 829457 FP multiply pipe ops , 158558, 830361, 494459 Packed SSE instructions , 419725, 444353, 432039 L1 data cache accesses , 313840770, 337758406, 325799588 Processor clock (GHz) , 2.400, 2.400, 2.400 STDIO summary , min, max, avg Total I/O time , 0.000, 0.322, 0.161 TOtal I/O (MB) , 0.000, 0.001, 0.001 Total write time , 0.000, 0.322, 0.161 Total write (MB) , 0.000, 0.001, 0.001 fwrite calls , 0, 330, 165 fwrite time , 0.000, 0.322, 0.161 fwrite total (MB) , 0.000, 0.001, 0.001 Heap summary , min, max, avg Maximum heap size (MB) , 66.527, 66.542, 66.534 Average block size (KB) , 140.310, 240.756, 190.533 Maximum blocks allocated , 127, 129, 128 Total blocks allocated , 283, 486, 384 MPI summary , min, max, avg Elapsed time , 0.330, 0.330, 0.330 Communication time , 0.002, 0.207, 0.105 Wait time , 0.001, 0.060, 0.031 MPI_Send total calls , 10, 50, 30 MPI_Send average bytes , 1600.000, 1705.600, 1652.800 MPI_Send total bytes , 16000, 85280, 50640 MPI_Ssend total calls , 10, 10, 10 MPI_Ssend average bytes , 2664, 2664, 2664 MPI_Ssend total bytes , 26640, 26640, 26640 MPI_Rsend total calls , 0, 10, 5 MPI_Rsend average bytes , 0, 2664, 1332 MPI_Rsend total bytes , 0, 26640, 13320 MPI_Recv total calls , 40, 60, 50 MPI_Recv average time , 0.000, 0.003, 0.001 MPI_Recv total time , 0.000, 0.177, 0.089 MPI_Recv average bytes , 6000, 8000, 7000 MPI_Recv total bytes , 240000, 480000, 360000
Example Detail Report
Process 0: System details Wall clock time , 0.427 User CPU time , 0.427 Processor clock (GHz) , 2.400 Hostname , salmon Process 0: PAPI details Total processor cycles , 791855041 User processor cycles , 791855669 FP add pipe ops , 383795 FP multiply pipe ops , 158558 Packed SSE instructions , 444353 L1 data cache accesses , 337758406 Processor clock (GHz) , 2.400 Process 0: STDIO details Total I/O time , 0.322 TOtal I/O (MB) , 0.001 Total write time , 0.322 Total write (MB) , 0.001 fwrite calls , 330 fwrite time , 0.322 fwrite total (MB) , 0.001 Process 0: Heap details Maximum heap size (MB) , 66.542 Average block size (KB) , 140.310 Maximum blocks allocated , 129 Total blocks allocated , 486 Process 0: MPI details Elapsed time , 0.330 Communication time , 0.002 Wait time , 0.001 MPI_Send total calls , 10 MPI_Send average bytes , 1600 MPI_Send total bytes , 16000 MPI_Ssend total calls , 10 MPI_Ssend average bytes , 2664 MPI_Ssend total bytes , 26640 MPI_Rsend total calls , 10 MPI_Rsend average bytes , 2664 MPI_Rsend total bytes , 26640 MPI_Recv total calls , 40 MPI_Recv average bytes , 6000 MPI_Recv total bytes , 240000
Ignored Processes
By default, no profile is written for some processes. These processes are part of regular job launch on Cray XT systems.
- PMI shepherd process in MPI programs.
- The ALPS aprun command.
- The ALPS gzip utility (/usr/bin/gzip).