- Infos im HLRS Wiki sind nicht rechtsverbindlich und ohne Gewähr -
- Information contained in the HLRS Wiki is not legally binding and HLRS is not responsible for any damages that might result from its use -

Open MPI

From HLRS Platforms
Revision as of 15:35, 15 November 2023 by Hpcchris (talk | contribs) (→‎Process binding/pinning)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Open MPI is an Message Passing Interface (MPI) library project combining technologies and resources from several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI).
Open-mpi-logo.png
Developer: Open MPI Development Team
Platforms: HPE_Hawk, Vulcan
Category: MPI
License: New BSD license
Website: Open MPI homepage


Examples

Simple example

This example shows the basic steps to use the global Open MPI installations on the systems at HLRS.

Load the necessary module to set up the environment

module load openmpi # on vulcan and hawk


Then compile your application using the Open MPI compiler wrappers mpicc, mpic++ or mpifort:

mpicc your_app.c -o your_app


The wrapper compilers will pass any necessary options, e.g., for include files or libraries to be linked, to the underlying base compiler and linker (e.g. GCC, Intel, AOCC). To display the options that the Open MPI wrapper passes to the base compiler and linker use the following option:

mpicc -showme

To get options to be passed only to a compiler or linker use -showme:compile, -showme:link.

Now you can allocate compute nodes via the Batch_system and run your application with

mpirun <OPTIONS> your_app

The most important options you may need on our systems are described in the following sections. For in depth information of all options we refer you to the man pages of mpirun.

Warning: You will most likely have to use process mapping and binding to achieve the best performance for your MPI application. Therefore, please make sure to read the sections about process mapping and binding!


Specifying the number of processes per node or socket for pure MPI applications

Open MPI divides resources in something called 'slots'. By default, Open MPI's mpirun will use all slots provided by the Batch_system.

Note: On Hawk, the number of slots per node is determined by the property mpiprocs passed to PBS's qsub command in the select statement (default: 128).


If you want to use less processes, e.g., because you're application is limited by memory requirements or you want to control the placement of a hybrid parallel application that uses MPI+OpenMP, you will need to provide additional options.

By default, Open MPI will try to fill sockets and nodes with processes before moving to the next socket or node. To achieve a different behaviour use the --map-by option.

To run your application with X processes and 1 process per node the following can be used:

mpirun -n X --map-by ppr:1:node your_app


To run your application with X processes and 1 processes per socket, e.g., for MPI+OpenMP, the following can be used:

mpirun -n X --map-by ppr:1:socket your_app


Warning: For hybrid (MPI+OpenMP) applications it is necessary to adapt the bindings as Open MPI will bind 1 processes to a single core by default! (see #Thread binding/pinning for hybrid MPI+OpenMP applications)


Process binding/pinning

To restrict the movement of processes, Open MPI supports binding to resources at various levels. By default Open MPI will choose a binding based on the used mapping, e.g., if you map processes by socket they will be bound by socket.

If you want to specify the process binding explicitly you can use the --bind-to option. For example, mapping processes by socket but binding them to cores (instead of the socket default) can be done with

mpirun -n X --map-by socket --bind-to core your_app


The process binding applied by Open MPI for provided options can be checked easily by the following command

mpirun ... --report-bindings /bin/true


Warning: On HAWK, the default behaviour of Open MPI 4.0.x and 4.1.x is to map by NUMA partition and not by socket as the Open MPI documentation states! If you want to bind by socket you have to specify this explicitly with --bind-to socket. (For details see the related MPI Issue])


Note: The --map-by and --bind-to options provide a lot of pre-defined solutions. However, if you need full manual control over the process placement and binding you can use the pe-list and rankfile arguments of --map-by.


Thread binding/pinning for hybrid MPI+OpenMP applications

To run a hybrid MPI+OpenMP application with fine grained control of the binding for the threads one can combine the binding options of Open MPI with OpenMP's environment variables for thread placement.

For example, an application shall be run using 16 MPI processes each itself using 4 OpenMP threads. Each process shall be mapped/bound to the l3cache and each thread shall be bound to a single core (in case of SMT all hwthreads belonging to this core). To achieve this one can use the following command:

mpirun -x OMP_NUM_THREADS=4 -x OMP_PLACES=cores -n 16 --map-by l3cache --bind-to l3cache your_app


Another example, to run an application with 16 MPI processes times 8 OpenMP threads and binding each thread to his own core:

mpirun -x OMP_NUM_THREADS=8 -x OMP_PLACES=cores -n 16 --map-by node:PE=8 --bind-to core your_app


To check the correct pinning of MPI+OpenMP applications beforehand one may use, e.g., the xthi program.

Valgrind Debugging

You may easily debug your application with the memory-error detector valgrind. This will detect errors such as usage of uninitialized memory, buffer over-runs, double-free's, lost memory (leaks). To run with Open MPI, just call valgrind specifying the application as an argument to it:

module load tools/valgrind
mpirun -n X valgrind your_app


This will show up many false positives from Open MPI itselve -- e.g. memory communicated via TCP/IP with known uninitialized memory, buffer copied from the kernel to the InfiniBand Verbs library. Valgrind offers suppressing these false positives. Open MPI provides a suppression-file installed in the default location:

mpirun -n X valgrind --suppressions=`dirname $(dirname $( which mpirun ))`/share/openmpi/openmpi-valgrind.supp your_app


Common Problems

InfiniBand retry count

I get an error message about timeouts, what can I do?

    If your parallel programs sometimes crash with an error message like this:
    --------------------------------------------------------------------------
    The InfiniBand retry count between two MPI processes has been
    exceeded.  "Retry count" is defined in the InfiniBand spec 1.2
    (section 12.7.38):
    
        The total number of times that the sender wishes the receiver to
        retry timeout, packet sequence, etc. errors before posting a
        completion error.
    
    This error typically means that there is something awry within the
    InfiniBand fabric itself.  You should note the hosts on which this
    error has occurred; it has been observed that rebooting or removing a
    particular host from the job can sometimes resolve this issue.  
    
    Two MCA parameters can be used to control Open MPI's behavior with
    respect to the retry count:
    
    * btl_openib_ib_retry_count - The number of times the sender will
      attempt to retry (defaulted to 7, the maximum value).
    
    * btl_openib_ib_timeout - The local ACK timeout parameter (defaulted
      to 10).  The actual timeout value used is calculated as:
    
         4.096 microseconds * (2^btl_openib_ib_timeout)
    
      See the InfiniBand spec 1.2 (section 12.7.34) for more details.
    --------------------------------------------------------------------------
    

    This means that the mpi messages can't pass through our infiniband switches before the btl_openib_ib_timeout is over. How often this occurs depends also on the traffic on the network. We have adjusted the parameters such that it should normally work, but if you have compiled your own OpenMPI, maybe also as part of another program package, you might not have adjusted this value correctly. However, you can specify it when calling mpirun:

    mpirun -mca btl_openib_ib_timeout 20 -np ... your-program ...
    

    you can check the preconfigured parameters of the module currently loaded by:

     ompi_info --param btl openib 
    

    where you can grep for the above mentioned parameters.


See also

External links